DBH 5831Pol radial shaft seal — 38.1 x 60.3 x 15.87

DBH 5831Pol belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 5831Pol and any equivalents.

The DBH 5831Pol oil seal is a radial shaft seal that retains lubricant and keeps contaminants out of rotating equipment. It fits a 38.10 mm shaft, a 60.30 mm housing and has a 15.87 mm height. MR Industrial Accessories supplies this seal and can help you confirm the dimensions before you order.

With a 38.10 mm shaft, 60.30 mm housing and 15.87 mm height, this seal is built for medium-section shafts. The outer diameter presses into the housing, the lip runs against the shaft and the height sets how far the seal sits in the bore. The A 083 design is a single-lip seal with a spring, which suits rotating shafts that see continuous lubrication. Always measure the shaft and housing before replacing a seal.

You will find this size in gearboxes, speed reducers, centrifugal pumps, electric motors, compressors and belt or chain drives. In these applications the seal does two jobs: it keeps oil or grease from leaking out and blocks dust, water and particles that would wear bearings and gears. It also appears in agricultural machinery, material handling equipment and process lines where the shaft turns continuously.

When selecting a seal, look beyond the three dimensions. Rotation speed, operating temperature and the lubricant in use all affect performance. A spring-loaded lip is the common choice for low internal pressure or when you need a firmer seal. During installation, clean the housing, lubricate the lip with the same oil or grease used in the equipment and press the seal in evenly and perpendicularly to avoid damaging the lip or distorting the casing. If the shaft shows wear or scoring, a seal with an auxiliary lip may be a better fit.

For an equivalent, send part number 5831Pol with the shaft, housing and height dimensions, and a photo of the old seal if you have one. With that information we can search for alternatives in the DBH line or other brands we supply, always matching the dimensions shown here.

MR Industrial Accessories provides seals, bearings, power transmission components and lubricants. If the DBH 5831Pol is the seal you need, contact us on WhatsApp with the part number and dimensions. We will reply with a quote and suitable alternatives for your equipment.