DBH 5834 radial shaft seal — 45 x 68 x 10/17
- Brand
- DBH
- Category
- Seals
- Subcategory
- Radial shaft seals
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DBH 5834 belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 5834 and any equivalents.
The DBH 5834 oil seal is a radial shaft seal with a single main lip and an additional dust lip, designed to keep oil or grease in and keep dust and water out. The A 023 design means the seal has a sealing lip plus an exclusion lip on a metal case that presses into the housing. It runs in contact with the shaft, so matching the dimensions and lip material to the application is essential.
This seal fits a shaft of 45 mm and a housing bore of 68 mm. Its overall height ranges from 10.00 to 17.00 mm depending on the lip position. The stepped height lets the main lip sit at one level and the dust lip at another, which helps block external contaminants.
Typical uses include gearboxes, pumps, electric motors, transmission shafts, and other rotating equipment. It is often chosen for environments with dust, chips, or wash water, such as food processing, agriculture, and process plants. It is also used on rollers and pulleys where lubricant retention matters. The seal helps protect bearings and prevents leaks that could affect the surrounding area.
Before installation, inspect the shaft for burrs or wear and make sure the housing is clean and free of damage. Lubricate the lip with the same oil or grease used in the equipment. Press the seal in evenly, preferably with a tube or socket that contacts the outer ring. If the shaft has a worn track, consider a repair sleeve or a different size. Lip material options such as nitrile or Viton depend on the operating temperature and the fluid being sealed.
To request a quote for code 5834 or for specific shaft, housing, and height dimensions, contact us. We can also suggest alternatives in other brands or configurations if the A 023 design does not suit your application. We supply DBH as one of the brands we carry.
For a quote, send code 5834 on WhatsApp along with the quantity and, if possible, a photo of the old seal or caliper measurements. We will reply with a quote and the most suitable option.
Dimensions
- Shaft (d)
- 45mm
- Housing bore (D)
- 68mm
- Height (h)
- 10.00/17.00mm
- Design
- A 023
Frequently asked questions
- What dimensions does the DBH 5834 oil seal have?
- It is for a 45 mm shaft and a 68 mm housing, with a height of 10.00 to 17.00 mm. Always verify against the original seal or manufacturer data before ordering.
- Is it suitable for high temperatures?
- That depends on the lip material. The A 023 design can be made in different compounds; tell us your working temperature and fluid so we can recommend the right variant.
- How do I request an equivalent?
- Send the shaft, housing, and height dimensions on WhatsApp, plus a photo of the seal. With that information we look for an equivalent among the brands we carry.