DBH 5356Sil radial shaft seal — 60 x 75 x 8

DBH 5356Sil belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 5356Sil and any equivalents.

The DBH 5356Sil is a radial shaft seal with an Lz configuration, meaning it combines a sealing lip with a spring. It fits a 60 mm shaft, a 75 mm housing bore and an 8.00 mm width. Its job is to keep oil or grease inside the assembly while keeping dust, water and particles out. MR Industrial Accessories offers this seal as part of its seals and oil seals range.

You will find this seal in gearboxes, centrifugal pumps, electric motors, conveyor rollers and machine tools. It also suits agricultural and industrial drives where the shaft turns continuously and the sealing area sees dust or moisture. Because the lip runs against the shaft, it wears over time and is replaced during preventive maintenance or when a leak shows up.

The code breaks down into two parts. The 5356Sil number identifies the size and construction within the DBH line, while Lz tells you the seal has a lip and a spring. The three dimensions to check are shaft 60 mm, housing 75 mm and width 8.00 mm. The seal presses into the housing and contacts the shaft directly.

Before pressing it in, clean the housing bore and shaft, and remove any burrs or marks that could cut the lip. Coat the lip with the same oil or grease used in the equipment. Use a flat driver that pushes on the outer diameter, never on the lip. The 8.00 mm width should sit flush or slightly recessed, depending on the housing design. If the shaft shows wear or grooves, look at a seal with an extra lip.

If you need a cross-reference, send the 5356Sil code or the 60 x 75 x 8 mm dimensions along with the application details. With that information we can search for alternatives in the DBH line or other brands we carry, always checking against the manufacturer's data. We can also tell you whether the housing accepts a different width or if a design with added dust protection makes sense.

MR Industrial Accessories supplies the DBH brand within its seals and oil seals catalog. To request a quote for this oil seal, send the 5356Sil code by WhatsApp and we will reply with the information you need. You can also send a photo of the used seal or caliper readings to confirm the correct part.