DBH 5355Vit radial shaft seal — 58 x 75 x 12

DBH 5355Vit belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 5355Vit and any equivalents.

The DBH 5355Vit is a radial shaft seal designed to keep lubricant in and contaminants out where a shaft rotates inside a fixed housing. It measures 58 mm at the shaft, 75 mm at the housing and 12.00 mm in height, and it uses the Lz lip and metal body configuration. This seal is a common replacement item for medium-section shafts in gearboxes, pumps, motors and similar equipment.

The DBH 5355Vit carries the designation 5355Vit and belongs to the DBH radial shaft seal line. Its three key dimensions are shaft diameter 58 mm, housing diameter 75 mm and height 12.00 mm. The Lz design describes how the lip and metal case are arranged. This is a radial seal for rotating shafts, not for reciprocating motion or high-pressure service. Before installation, make sure the housing bore is clean and free of burrs.

Typical applications include gearboxes, pumps, electric motors, rollers and transmission equipment where oil or grease must be retained and dust, water or particles kept out. You will also find it in machine tools, conveyors and process equipment. In every case, the lip runs against a rotating shaft inside a stationary housing. If the equipment sees heavy vibration or temperature swings, inspect the shaft condition before fitting the new seal.

To select the correct replacement, compare all three dimensions: shaft diameter, housing diameter and height. A seal with the same section but a different height may not seat properly. Check that the shaft surface is free of grooves or wear, because a damaged shaft will prevent the lip from sealing. During installation, lubricate the lip with the same oil or grease used in the equipment, press the seal in perpendicular and avoid striking the lip. If the housing has a shoulder or radius, confirm that the seal seats fully.

If you cannot find the exact size or need an equivalent, send the part number 5355Vit or the dimensions 58 x 75 x 12 mm with the Lz design. We can also search within our radial shaft seal category. The more details you provide — shaft diameter, housing diameter, height and application — the faster we can assist.

MR Industrial Accessories supplies the DBH brand as part of its seals and oil seals range. To request a quote for the 5355Vit, contact us on WhatsApp or by email with the part number. We can also help you evaluate a different design or material based on the fluid and operating temperature.