DBH 5356Vit radial shaft seal — 60 x 75 x 8

DBH 5356Vit belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 5356Vit and any equivalents.

The DBH 5356Vit is a radial shaft seal that keeps lubricant in and contaminants out of rotating equipment. It measures 60 mm at the shaft, 75 mm at the housing and 8.00 mm in height, and its Lz design means it has a sealing lip with a spring. You will find it in gearboxes, pumps, motors and transmissions. MR supplies this brand and can help you match the right seal to your application.

This seal carries the 5356Vit designation and the DBH brand. The code tells you the three dimensions you need to check before ordering: shaft 60 mm, housing 75 mm, height 8.00 mm. The Lz configuration uses a lip and spring to hold oil or grease against a rotating shaft. Because DBH is one of the brands MR supplies, you can ask about this size directly.

Oil seals like the 5356Vit are common in gearboxes, centrifugal pumps, electric motors, compressors and transmission shafts. In each case the seal keeps the lubricant where it belongs and blocks dust, water and particles that would otherwise reach the bearings. Treat it as a wear part: replace it when you see leaks or hear unusual noise around the sealing area.

Before installation, confirm the shaft is 60 mm and the housing bore is 75 mm, with a smooth finish and no burrs. The 8.00 mm height must fit the housing depth. Lubricate the lip with the same oil or grease used in the assembly, then press the seal in squarely so the lip is not damaged. If the shaft is worn, look at an offset-lip seal or a repair sleeve.

If you need an alternative to the 5356Vit, send us the complete code, the dimensions or a photo of the original part. We can suggest equivalents from other brands based on shaft, housing and height. Every request is reviewed so the option we propose fits your equipment.