DBH 1302Vit radial shaft seal — 47 x 84 x 9.5/12.5
- Brand
- DBH
- Category
- Seals
- Subcategory
- Radial shaft seals
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DBH 1302Vit belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 1302Vit and any equivalents.
When a gearbox, pump or motor starts weeping lubricant, the DBH 1302Vit oil seal is often the part to replace. It fits a 47 mm shaft in an 84 mm housing and has a 9.50/12.50 mm height. The A 308 design uses a metal body with a sealing lip, so it holds oil or grease inside rotating assemblies and keeps dust and water out. MR supplies this seal for maintenance and repair work.
Reading the code helps you match the part. The 1302Vit number covers size and construction within the DBH line that MR carries. The three values that matter on the bench are the shaft diameter of 47 mm, the housing bore of 84 mm and the 9.50/12.50 mm height. The A 308 design is a lip seal with a metal case, intended to retain lubricant in rotating service.
You will find this seal in gearboxes, centrifugal pumps, electric motors, mixers and conveyors, as well as in machine tools and belt or chain drives. In every case the job is the same: hold the lubricant where it belongs and stop contaminants from reaching the bearings and gears, which is what keeps those parts running.
Fitting it correctly matters as much as choosing it. Clean the shaft and housing and remove burrs or scratches before you start. Coat the lip with the same oil or grease the equipment uses, then press the seal in with a proper tool, keeping pressure even around the outer diameter. The 9.50/12.50 mm height lets it seat in a cavity with a shoulder. If the shaft is worn, a repair sleeve or a different size may be the better route.
If you need an equivalent, give us the 1302Vit code or the shaft, housing and height dimensions. MR can point you to options from the same brand or from other lines we carry, and we also supply bearings, housings, power transmission parts and lubricants for the rest of the job. Send your request by WhatsApp or email and the team will reply promptly.
Dimensions
- Shaft (d)
- 47mm
- Housing bore (D)
- 84mm
- Height (h)
- 9.50/12.50mm
- Design
- A 308
Frequently asked questions
- What size shaft and housing does the DBH 1302Vit seal fit?
- It is made for a 47 mm shaft and an 84 mm housing bore, with a height of 9.50/12.50 mm. The A 308 design refers to the lip and metal body construction.
- Where is this oil seal typically used?
- Common spots are gearboxes, centrifugal pumps, electric motors, mixers, conveyors, machine tools and belt or chain drives. Its role is to keep lubricant in and contaminants out, protecting bearings and gears.
- How do I ask for a quote or an equivalent seal?
- Send the 1302Vit code, or the shaft, housing and height dimensions, to MR by WhatsApp or email. The team replies promptly and can suggest equivalents from the brands we supply.