V-belt Dayco CP330
- Brand
- DAYCO
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
- Series
- Classical wrapped industrial belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DAYCO CP330 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for CP330 and any equivalents.
The Dayco CP330 is a classical wrapped V-belt in the C profile. When you are replacing an existing belt, match the profile and the length on the belt you are removing. This page gives you the dimensions to check against it.
The CP330 is a C profile belt with a top width of 22 mm and a height of 14 mm. The included angle is 40 degrees. Its length is 8432.8 mm. These are the figures to compare with the marking on the belt being replaced and with the sheave groove it runs in.
Start by reading the back of the old belt. If the profile and length agree with the CP330, it is the same size. If the profile is the same but the length differs, note the length you need and send it. If the profile differs, note that as well.
For a quote, send the part number CP330, or the profile and length from the old belt. A photo of the back of the belt and of the drive helps confirm the match before you order.
Dimensions
- Section
- C
- Length
- 8432.8mm
Frequently asked questions
- How do I confirm the CP330 matches the belt I am replacing?
- Check the C profile, the 22 mm top width, the 14 mm height and the 8432.8 mm length against the old belt. The 40-degree angle should also match the sheave groove.
- What should I send to request a quote?
- Send the part number CP330, or the profile and length from the belt being replaced. A photo of the back of the belt and the drive helps confirm the match.
- What if the length on my old belt is different?
- Send the profile and the length you need. We will check the CP330 dimensions against it and help confirm the right belt.