V-belt Dayco CP314

DAYCO CP314 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for CP314 and any equivalents.

The Dayco CP314 is a classical wrapped V-belt in the C profile, with an 8026.4 mm length, 22 mm top width, 14 mm height, and a 40° angle. It is used in industrial drives where a wrapped classical belt is specified, such as those on large fans, pumps, and compressors. Confirm fit by matching the profile and length to your existing belt.

Classical wrapped V-belts like the CP314 are common in general industrial power transmission. The C profile is a standard cross-section, and the 8026.4 mm length is the datum length. Check that your drive uses a C profile and that the belt length matches the original.

To confirm fit, read the marking on the back of the old belt. It should show the profile and length. If the marking is worn, measure the top width and height, and compare them to the 22 mm and 14 mm dimensions. Also check the pulley groove angle; the 40° angle is standard for this profile.

When replacing, inspect all pulleys for wear and alignment. Replace belts in sets if the drive uses multiple belts. For a quote, send the part number CP314, the profile, and the length from the old belt.