V-belt Dayco CP300
- Brand
- DAYCO
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
- Series
- Classical wrapped industrial belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DAYCO CP300 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for CP300 and any equivalents.
The Dayco CP300 is a classical wrapped V-belt in the C profile. It measures 7670.8 mm in length, with a 22 mm top width, 14 mm height, and a 40° angle. This page gives you the key dimensions so you can confirm it against your drive.
The C profile is a standard classical cross-section. The 7670.8 mm length is the datum you need when checking a replacement against an existing drive. With a 22 mm top width and 14 mm height, the belt seats in a C-section pulley groove. The 40° angle is the included angle of the belt cross-section.
When you request a quote, send the part number CP300 and the machine or drive reference. If you are matching an old belt, read the marking on the back: profile and length are the two values to compare first. If the marking is worn, measure the outside length and confirm the cross-section before ordering.
We carry the Dayco CP300 for industrial drives that use classical C-section belts. If you need help confirming that this profile and length suit your application, contact our team by WhatsApp or email with the part number and any details from the existing belt.
Dimensions
- Section
- C
- Length
- 7670.8mm
Frequently asked questions
- What are the dimensions of the Dayco CP300?
- It is a C-profile classical V-belt with a length of 7670.8 mm, a top width of 22 mm, a height of 14 mm, and a 40° angle.
- How do I confirm the CP300 matches my drive?
- Check the belt marking for the C profile and the 7670.8 mm length. If the marking is not clear, measure the existing belt and compare the top width and height to the 22 mm and 14 mm values.
- What should I send to get a quote for the CP300?
- Send the part number CP300, the quantity, and any drive or equipment details. If you have the old belt, include a photo of the back marking so we can help confirm the profile and length.