V-belt Dayco CP297
- Brand
- DAYCO
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
- Series
- Classical wrapped industrial belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DAYCO CP297 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for CP297 and any equivalents.
The Dayco CP297 is a classical wrapped V-belt in a C profile. It measures 7594.6 mm in length, with a 22 mm top width, 14 mm height and a 40-degree angle. If you are sourcing this belt, the fastest path is to send the part number and the machine it runs on.
To request a quote, send the full part number, CP297, and the quantity you need. Note the drive position and the application so we can confirm the fit. A photo of the belt marking on the back of the belt helps when the number is worn or hard to read.
The profile and length are the key selection points. This belt is a C profile with a 7594.6 mm length, 22 mm top width, 14 mm height and 40-degree angle. If you are replacing a belt on the same drive, check that the old belt marking matches these figures before ordering.
Wrapped classical V-belts like the CP297 are used on industrial drives where a standard classical section is required. Inspect the sheaves for wear and check the belt for cracking or glazing during replacement. For drives with multiple belts, replace the full set so the load stays even across all belts.
Dimensions
- Section
- C
- Length
- 7594.6mm
Frequently asked questions
- What should I send to get a quote for the Dayco CP297?
- Send the part number CP297, the quantity, and the drive or machine it fits. A photo of the marking on the back of the belt is useful if the number is not clear.
- What are the dimensions of this belt?
- It is a C profile classical V-belt with a length of 7594.6 mm, a top width of 22 mm, a height of 14 mm and a 40-degree angle.
- Can you help confirm this is the right belt for my drive?
- Yes. Send the part number and the drive details. We can confirm the profile and length from the marking and help you match the belt to your application.