V-belt Dayco CP265
- Brand
- DAYCO
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
- Series
- Classical wrapped industrial belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DAYCO CP265 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for CP265 and any equivalents.
The Dayco CP265 is a classical V-belt in the C profile, with a top width of 22 mm, a height of 14 mm and a 40-degree angle. It measures 6781.8 mm in length. Before fitting a belt of this length, inspect the drive and its sheaves.
Worn sheave grooves, misalignment, damaged bushings and loose mounting hardware all shorten belt life. Check each sheave groove for wear, scoring and embedded debris, confirm the sheaves are aligned, and verify that the driven equipment turns freely. Correcting these conditions before installation protects the new belt and the drive.
The CP265 is a wrapped classical V-belt for industrial drives. Its C profile is identified by the 22 mm top width and 14 mm height, and the 40-degree angle seats in standard C-section sheaves. The belt length is 6781.8 mm, so confirm the replacement matches the marking on the old belt before ordering.
To request a quote, send the part number CP265 by WhatsApp or email. If you are unsure of the profile or length, send the full marking from the back of the old belt, along with the drive details, and the team will help confirm the right belt.
Dimensions
- Section
- C
- Length
- 6781.8mm
Frequently asked questions
- How do I confirm the Dayco CP265 fits my drive?
- Check the marking on the back of the old belt against the CP265 part number, and confirm the belt is a C profile with a 22 mm top width and a 6781.8 mm length. If the marking is unreadable, send photos of the belt and sheaves for confirmation.
- What should I inspect before installing a new classical V-belt?
- Inspect the sheave grooves for wear and debris, verify sheave alignment, check bearings and bushings for play, and confirm the drive turns freely. These checks help prevent premature belt failure.
- What information do I need to send for a quote?
- Send the part number CP265 by WhatsApp or email. If you need help confirming the belt, include the full marking from the old belt and details of the drive.