V-belt Dayco CP248
- Brand
- DAYCO
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
- Series
- Classical wrapped industrial belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DAYCO CP248 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for CP248 and any equivalents.
The Dayco CP248 is a classical V-belt in the C profile. It measures 6350 mm in length, 22 mm across the top, 14 mm in height, and has a 40-degree angle. To match it to the belt being replaced, compare these dimensions directly with the belt you are removing.
Check the profile and length first. The C profile and 6350 mm length are the primary points of comparison. Also confirm the 22 mm top width, 14 mm height, and 40-degree angle against the old belt. If the dimensions match, the CP248 is the correct replacement.
If the old belt is worn or the marking is unreadable, measure it before ordering. Measure the top width, height, and outside length. Note the profile letter if it is visible. These values let us confirm the CP248 or identify a different belt.
The CP248 is a classical wrapped V-belt. It is used in industrial drives where a C profile belt of this length is specified. Send the part number and the dimensions of the belt being replaced by WhatsApp or email to request a quote.
Dimensions
- Section
- C
- Length
- 6350mm
Frequently asked questions
- How do I confirm the Dayco CP248 is the right belt for my drive?
- Compare the dimensions of the belt you are replacing with the CP248: C profile, 6350 mm length, 22 mm top width, 14 mm height, and 40-degree angle. If these match, the CP248 is the correct belt.
- What should I send to request a quote for the CP248?
- Send the part number CP248 and the dimensions of the belt being replaced. If you have the old belt, include its profile and length. Our team will confirm the match or help you find an equivalent.
- Can you help if the marking on my old belt is unreadable?
- Yes. Measure the top width, height, and outside length of the old belt. Send those measurements and any remaining profile information. We will use them to identify the correct replacement.