V-belt Dayco CP246
- Brand
- DAYCO
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
- Series
- Classical wrapped industrial belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DAYCO CP246 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for CP246 and any equivalents.
The Dayco CP246 is a classical V-belt in the C profile, measuring 6299.2 mm in length with a 22 mm top width and 14 mm height. Before fitting it, inspect the drive and sheaves so the new belt seats and wears correctly.
A classical V-belt runs in the sheave groove and relies on the groove walls for grip. Worn, polished or undersized grooves, misaligned sheaves, or a damaged sheave face will shorten belt life and cause slip or heat. Check each groove for wear and verify that the sheaves are aligned and free of burrs before the CP246 goes on.
The CP246 has a 40-degree angle, 22 mm top width and 14 mm height, with a length of 6299.2 mm. Confirm the drive takes a C profile belt and that the length matches the old belt's marking. If the drive uses multiple belts, replace the full set so all belts share the load evenly.
To request a quote, send the part number CP246, the quantity, and the drive or equipment details. If the old belt's marking is worn, send a photo of the belt and sheaves. Our team will confirm the C profile and 6299.2 mm length and reply by WhatsApp or email.
Dimensions
- Section
- C
- Length
- 6299.2mm
Frequently asked questions
- What are the dimensions of the Dayco CP246?
- The CP246 is a C profile classical V-belt with a length of 6299.2 mm, a top width of 22 mm, a height of 14 mm and a 40-degree angle.
- Should I check the sheaves before installing this belt?
- Yes. Inspect the sheave grooves for wear, cracks or misalignment before fitting the CP246. Worn grooves can prevent the belt from seating properly and lead to slip or early failure.
- What information do I need to send for a quote?
- Send the part number CP246, the quantity required, and any drive details or photos of the old belt and sheaves. We will confirm the profile and length and reply by WhatsApp or email.