V-belt Dayco CP240
- Brand
- DAYCO
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
- Series
- Classical wrapped industrial belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DAYCO CP240 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for CP240 and any equivalents.
The Dayco CP240 is a classical wrapped V-belt with a C profile and a length of 6146.8 mm. Its 22 mm top width, 14 mm height and 40° angle define how it seats in a C-section pulley groove. Use these dimensions to check the belt against your drive before you order.
Profile and length are the two numbers that decide whether a classical V-belt fits. The C profile sets the cross-section: 22 mm across the top, 14 mm high, with a 40° angle that matches the groove walls it runs in. The 6146.8 mm length is the datum you compare against the old belt or the drive layout. If either figure is off, the belt will not sit or tension correctly.
The cleanest way to confirm a replacement is to read the marking on the back of the belt you are removing. Look for the profile letter and the length, then match them to the CP240. If the marking is worn away, measure the top width and the outside length of the old belt and compare those figures with the 22 mm and 6146.8 mm above.
When you request a quote, send the part number CP240 along with the profile and length from your drive. A photo of the belt marking or the pulley groove helps us confirm the C section. We carry Dayco belts and can check the details against your application before you commit.
Dimensions
- Section
- C
- Length
- 6146.8mm
Frequently asked questions
- What do the C profile and 6146.8 mm length mean for fit?
- The C profile gives a 22 mm top width, 14 mm height and 40° angle, so the belt seats in a C-section pulley groove. The 6146.8 mm length must match the drive's required belt length. Both figures need to agree with your old belt or drive layout.
- How do I confirm the CP240 matches the belt I am replacing?
- Read the marking on the back of the old belt and compare the profile letter and length with the CP240. If the marking is not legible, measure the top width and outside length and check them against 22 mm and 6146.8 mm.
- What should I send with my quote request?
- Send the part number CP240, the profile and length from your drive, and a photo of the old belt marking or pulley groove if you have one. That lets us confirm the C section against your application.