V-belt Dayco CP270
- Brand
- DAYCO
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
- Series
- Classical wrapped industrial belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DAYCO CP270 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for CP270 and any equivalents.
The Dayco CP270 is a classical V-belt in the C profile, with a 6908.8 mm length, 22 mm top width, 14 mm height and a 40° angle. The profile and length are the two values that decide fit on a classical drive, so match both against the belt you are replacing.
The C profile sets the cross-section: 22 mm across the top and 14 mm high, with a 40° angle. That section must match the sheave groove, because a belt of the wrong profile will not seat correctly no matter how close the length is.
The 6908.8 mm length is the second check. Read it from the marking on the back of the old belt, or measure the drive, then compare it to this figure. If the length differs, the belt will not hold the correct tension.
For a quote, send the part number CP270 along with the profile and length you need confirmed. If the exact belt is not the right match, we can help confirm the correct belt or suggest an equivalent.
Dimensions
- Section
- C
- Length
- 6908.8mm
Frequently asked questions
- What do the profile and length tell me about this belt?
- The C profile gives the cross-section: 22 mm top width, 14 mm height and a 40° angle. The 6908.8 mm length gives the belt's length. Both must match your drive.
- How do I confirm this is the belt I need?
- Read the marking on the back of the old belt and compare the part number, profile and length. If the marking is unreadable, measure the drive and send the details.
- What should I send for a quote?
- Send the part number CP270, plus the profile and length you need confirmed. We reply by WhatsApp or email and can help confirm the right belt or suggest an equivalent.