V-belt Dayco CP180
- Brand
- DAYCO
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
- Series
- Classical wrapped industrial belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DAYCO CP180 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for CP180 and any equivalents.
The Dayco CP180 is a classical V-belt in the C profile, with a length of 4673.6 mm, a top width of 22 mm and a height of 14 mm. The 40° angle is the standard V-belt flank angle for this profile. This page gives you the profile and length details you need to match or replace an existing belt.
The C profile is a classical V-belt cross-section, not a narrow wedge belt. With a 22 mm top width and 14 mm height, it fits pulleys cut for C-section belts. The 4673.6 mm length is the datum length for this belt, so check the marking on your old belt or measure the drive before ordering.
Because the CP180 is a wrapped classical belt, it is typically used on industrial drives where the pulley groove matches the C profile. If you are replacing a belt on a drive with multiple grooves, inspect all belts and replace them as a set so the load stays even.
To request a quote, send the part number CP180, the quantity, and any marking from the back of the old belt. If you are unsure of the profile or length, send a photo of the belt and the pulley groove, and we will help confirm the right belt or suggest an equivalent.
Dimensions
- Section
- C
- Length
- 4673.6mm
Frequently asked questions
- What are the dimensions of the Dayco CP180?
- The CP180 has a C profile with a 4673.6 mm length, 22 mm top width, 14 mm height and a 40° angle.
- How do I confirm the CP180 is the right belt for my drive?
- Check the marking on the back of your old belt for the profile and length. The C profile and 4673.6 mm length must match the pulley groove and drive center distance.
- Can I order a single CP180 or do I need a set?
- You can order any quantity. On drives with multiple belts, replacing the full set at the same time helps keep tension and load even across the grooves.