V-belt Dayco CP173
- Brand
- DAYCO
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
- Series
- Classical wrapped industrial belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DAYCO CP173 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for CP173 and any equivalents.
The Dayco CP173 is a classical V-belt in the C profile, with a length of 4495.8 mm, a top width of 22 mm, a height of 14 mm and a 40° angle. It is part of the Dayco classical wrapped industrial belts series. Before you fit this belt, inspect the drive and sheaves.
A new belt will not correct worn sheaves. Check the groove flanks for wear, scoring or a polished step, and confirm the sheaves are aligned and free of runout. A belt seated in a worn groove can slip or wear quickly even when the profile and length are correct. If the drive shows these conditions, address the sheaves first.
Confirm the replacement against the marking on the back of the old belt: the part number, the C profile and the 4495.8 mm length. The CP173 is a classical V-belt, not a narrow wedge belt, so the sheave groove must match the C profile. For a quote, send the part number, the quantity, and the drive or equipment reference if you have it.
When you replace a belt on a multi-belt drive, fit the full set at the same time so the load is shared evenly. Keep the old belt for comparison until the new one is running true. If the drive continues to slip or run hot after installation, stop and recheck the sheaves, alignment and tension.
Dimensions
- Section
- C
- Length
- 4495.8mm
Frequently asked questions
- What are the dimensions of the Dayco CP173?
- The CP173 is a C profile classical V-belt with a length of 4495.8 mm, a top width of 22 mm, a height of 14 mm and a 40° angle.
- What should I check on the drive before fitting this belt?
- Inspect the sheave grooves for wear, scoring or a step, confirm the sheaves are aligned and check for runout. Correct any sheave problems before installing the new belt.
- How do I request a quote for the Dayco CP173?
- Send the part number CP173, the quantity you need, and the drive or equipment reference by WhatsApp or email. The team will reply promptly to confirm the belt or suggest an equivalent.