V-belt Dayco CP177
- Brand
- DAYCO
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
- Series
- Classical wrapped industrial belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DAYCO CP177 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for CP177 and any equivalents.
The Dayco CP177 is a classical wrapped V-belt in the C profile, with a top width of 22 mm and a height of 14 mm. Its 40-degree angle and 4597.4 mm length make it a direct reference point when you are replacing a worn belt on an existing drive. Before fitting it, inspect the drive and sheaves so the new belt is not damaged by worn grooves.
Check sheave grooves for wear, scoring, or a polished step where the belt has been running. Worn grooves let the belt sit too low, which reduces grip and shortens belt life even when the replacement is correct. Confirm the sheaves are aligned and that the drive is free of debris or damaged guards.
Measure the old belt and compare it with the Dayco CP177 marking before installation. The C profile, 22 mm top width, 14 mm height, and 4597.4 mm length identify this belt; if the old belt is stretched or worn, use the part number rather than the measured length alone. Tension the belt according to the drive manufacturer's specification and recheck it after the first run-in period.
For a quote, send the part number CP177, the quantity, and any drive details you have. If you are unsure whether this is the right belt for the application, include the old belt marking and the sheave dimensions so the team can confirm the C profile and 4597.4 mm length.
Dimensions
- Section
- C
- Length
- 4597.4mm
Frequently asked questions
- What are the dimensions of the Dayco CP177 belt?
- It is a C profile classical V-belt with a 22 mm top width, 14 mm height, 40-degree angle, and 4597.4 mm length.
- Should I replace the sheaves when I replace this belt?
- Inspect the sheaves first. If the grooves are worn, scored, or stepped, the new belt may not seat correctly and will wear faster. Replace or repair sheaves as needed before fitting the CP177.
- How do I request a quote for the Dayco CP177?
- Send the part number CP177 and the quantity by WhatsApp or email. If you want confirmation that it matches your drive, include the old belt marking and sheave dimensions.