V-belt Dayco CP111

DAYCO CP111 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for CP111 and any equivalents.

The Dayco CP111 is a classical wrapped V-belt in a C profile. It measures 2921 mm in length, with a 22 mm top width, a 14 mm height and a 40-degree angle. This page is for maintenance, engineering and purchasing staff who need to match it to the belt being replaced.

To match the belt being replaced, read the marking on the back of the old belt and compare it with the profile and length here. The CP111 is a C profile belt, 2921 mm long, 22 mm across the top and 14 mm high, with a 40-degree angle. If the old belt carries the same profile and length, the CP111 is the direct match. If the marking is worn or unreadable, measure the outside length and the top width, and check the belt cross-section against the C profile dimensions above.

A classical wrapped V-belt like the CP111 is used where the drive calls for a C section belt of this length. Confirm the belt sits correctly in the pulley groove and that the angle and width suit the sheave. If the drive runs more than one belt, replace the full set at the same time so the belts share the load evenly and wear at the same rate.

We carry the Dayco CP111 for customers in the United States, Canada, Mexico and South America. Send the part number, the quantity and the profile and length you need by WhatsApp or email, and the team will confirm the belt or suggest an equivalent.