V-belt Dayco CP112
- Brand
- DAYCO
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
- Series
- Classical wrapped industrial belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DAYCO CP112 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for CP112 and any equivalents.
The Dayco CP112 is a classical wrapped V-belt in the C profile, with a length of 2946.4 mm. It measures 22 mm across the top, 14 mm in height, and has a 40 degree angle. This page covers how to match it to the belt you are replacing.
The most reliable match is the marking on the back of the belt you are removing. Look for the Dayco part number and the profile and length figures. If the old belt is worn or the print has rubbed off, measure the outside length and compare it to the 2946.4 mm listed here. A C profile belt should be 22 mm at the top and 14 mm tall, so check those dimensions with a caliper before ordering.
The 40 degree angle is the standard V-belt angle, so the belt should sit correctly in a matching C profile pulley groove. Inspect the sheave for wear, rust, or a polished groove floor, since a worn pulley can make a new belt sit too deep and slip. Confirm the drive takes a classical wrapped belt rather than a narrow wedge, cogged, or banded construction.
Once you have the marking or measurements, send the part number CP112 to our team by WhatsApp or email. We can confirm the C profile and 2946.4 mm length, or help you find the right belt for the drive. Include the application details and any photos of the old belt and pulley if the marking is unclear.
Dimensions
- Section
- C
- Length
- 2946.4mm
Frequently asked questions
- How do I confirm the Dayco CP112 is the right replacement?
- Check the part number printed on the back of the belt you are replacing. If it is unreadable, measure the outside length and compare it to 2946.4 mm, and confirm the top width is 22 mm and the height is 14 mm.
- What profile is the Dayco CP112?
- It is a C profile classical wrapped V-belt, with a 22 mm top width, 14 mm height, 40 degree angle, and 2946.4 mm length.
- What should I send to get a quote?
- Send the part number CP112 by WhatsApp or email. If you are unsure of the match, include the belt marking, the measured length, and a photo of the drive and pulley.