V-belt Dayco BX 80
- Brand
- DAYCO
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- BX
- Series
- Classical raw-edged industrial belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
DAYCO and STARK: matching part numbers →DAYCO and MITSUBOSHI: matching part numbers →DAYCO and OPTIBELT: matching part numbers →DAYCO and GATES: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DAYCO BX 80 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for BX 80 and any equivalents.
This Dayco BX 80 is a cogged classical V-belt in the BX profile with a length of 2108.2 mm. The raw-edged, cogged construction is used on industrial drives where a classical V-belt cross-section is required and the pulley grooves call for a BX profile.
Confirm fit by reading the marking on the back of the old belt: the profile and length shown there should match BX and 2108.2 mm. If the drive uses a set of belts, note how many are on the drive and the condition of each one, since replacing them as a set keeps the load shared evenly across the grooves.
Inspect the pulleys and grooves at the same time. Check for wear, misalignment, oil or debris that can shorten belt life. A worn or damaged groove can cause a new belt to seat incorrectly, so correcting the drive before installation protects the replacement.
The same size is also listed under Stark BX 80, Mitsuboshi BX 80, Optibelt BX 80 and Gates BX 80. To request a quote, send the part number Dayco BX 80, the quantity, and the profile and length from the old belt if you have them. Our team replies promptly and can help confirm the right belt or suggest an equivalent.
Dimensions
- Section
- BX
- Length
- 2108.2mm
Frequently asked questions
- How do I confirm that the Dayco BX 80 fits my drive?
- Check the marking on the back of the belt you are replacing. It should show the BX profile and a length of 2108.2 mm. Also confirm the number of belts on the drive and the condition of the pulleys.
- Can you help if I am not sure about the profile or length?
- Yes. Send the part number you have, along with any marking from the old belt, and our team can help confirm the right belt or suggest an equivalent.
- Is the same size listed under other brands?
- Yes. The same size is also listed under Stark BX 80, Mitsuboshi BX 80, Optibelt BX 80 and Gates BX 80.