V-belt Dayco BX 82
- Brand
- DAYCO
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- BX
- Series
- Classical raw-edged industrial belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
DAYCO and STARK: matching part numbers →DAYCO and OPTIBELT: matching part numbers →DAYCO and GATES: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DAYCO BX 82 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for BX 82 and any equivalents.
This page covers the Dayco BX 82, a cogged classical V-belt in the BX profile with a length of 2159 mm. It is part of Dayco's line of classical raw-edged industrial belts. Before you fit a new belt, inspect the drive and sheaves so the replacement runs true.
A new belt will not correct a worn drive. Check sheave grooves for wear, rust, burrs or embedded debris, and confirm the sheaves are aligned and securely mounted. Look for oil, grease or coolant that can reach the belt, and verify that guards and tensioning hardware are in good condition. If the old belt failed early, the sheave condition is often the reason.
The BX profile and 2159 mm length identify this belt. If you are matching an existing installation, read the marking on the back of the old belt and compare it with the Dayco BX 82. The same size is also listed under Stark BX 82, Optibelt BX 82 and Gates BX 82, which can help when you are cross-checking a drive that uses more than one brand.
When you request a quote, send the part number BX 82 and the quantity you need. If you are replacing a set, include the number of belts on the drive so the team can confirm the right belt or suggest an equivalent. You can send this by WhatsApp or email.
Dimensions
- Section
- BX
- Length
- 2159mm
Frequently asked questions
- What should I check on the drive before installing a Dayco BX 82?
- Inspect sheave grooves for wear, rust, burrs and debris, confirm alignment and mounting, and check for oil or grease that can reach the belt. Also inspect guards and tensioning hardware.
- How do I confirm this is the right belt for my drive?
- Read the marking on the back of the old belt and compare the profile and length with the Dayco BX 82. The same size is also listed under Stark BX 82, Optibelt BX 82 and Gates BX 82.
- What information should I send with my quote request?
- Send the part number BX 82, the quantity, and the number of belts on the drive if you are replacing a set. The team can then confirm the right belt or suggest an equivalent.