V-belt Mitsuboshi BX 80
- Brand
- MITSUBOSHI
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- BX
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
MITSUBOSHI and STARK: matching part numbers →MITSUBOSHI and OPTIBELT: matching part numbers →DAYCO and MITSUBOSHI: matching part numbers →GATES and MITSUBOSHI: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MITSUBOSHI BX 80 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for BX 80 and any equivalents.
The Mitsuboshi BX 80 is a cogged classical V-belt in the BX profile. When you read the marking on the back of an old belt, the profile and the length are the two pieces of information you need to match it. This page covers the BX 80 and how to use the marking to request a quote.
The marking on a belt back is usually a short string of letters and numbers. For this belt the marking reads BX 80. The BX is the profile, a cogged classical V-belt cross-section. The 80 identifies the belt in the manufacturer's length system. If the old belt is worn or dirty, clean the back with a rag and read the characters left to right before you search.
The same size is also listed under Stark BX 80, Optibelt BX 80, Dayco BX 80 and Gates BX 80. If your drive uses more than one belt, replace the full set at the same time so the belts share the load evenly. Check the sheaves for wear, oil or debris while the belts are off, and confirm the belt sits correctly in the groove.
Send the marking from the old belt, the quantity you need and the drive it runs on by WhatsApp or email. The team can confirm the BX 80 or suggest an equivalent, and will reply promptly with a quote.
Dimensions
- Section
- BX
Frequently asked questions
- How do I identify the belt if the marking is worn?
- Measure the top width and the outside length, and note the profile shape. Send those details and a photo of the belt and the drive to the team for confirmation.
- Is the BX 80 a cogged belt?
- Yes. The Mitsuboshi BX 80 is a cogged classical V-belt in the BX profile.
- Can I mix this belt with another brand on the same drive?
- The same size is also listed under Stark BX 80, Optibelt BX 80, Dayco BX 80 and Gates BX 80. For a matched set, replace all belts on the drive at the same time.