V-belt Dayco BX 74
- Brand
- DAYCO
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- BX
- Series
- Classical raw-edged industrial belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
DAYCO and GATES: matching part numbers →DAYCO and STARK: matching part numbers →DAYCO and MITSUBOSHI: matching part numbers →DAYCO and OPTIBELT: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DAYCO BX 74 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for BX 74 and any equivalents.
The Dayco BX 74 is a cogged classical V-belt in the BX profile with a length of 1955.8 mm. It is built for industrial drives where a raw-edged, cogged construction is specified. To confirm the correct replacement, match the profile and length to the belt you are removing.
The most reliable way to match this belt is to read the marking on the back of the belt being replaced. Look for the BX profile and the 1955.8 mm length. If the old belt is worn or the marking is unreadable, measure the outside length and compare it to the 1955.8 mm figure. The BX profile must match the pulley groove; a different profile will not seat correctly.
The same size is also listed under Stark BX 74, Mitsuboshi BX 74 and Optibelt BX 74. If you are cross-referencing from another brand, those are the equivalent listings for this size. For a quote, send the part number BX 74, the profile BX and the length 1955.8 mm, along with the quantity you need.
Before installing a replacement, inspect the drive for worn pulleys, misalignment and damaged sheaves. A new belt on a worn drive will not perform as expected. If you are replacing multiple belts on the same drive, order them as a set so they run together.
Dimensions
- Section
- BX
- Length
- 1955.8mm
Frequently asked questions
- How do I confirm the Dayco BX 74 is the right belt for my drive?
- Check the marking on the back of the belt you are replacing. It should show the BX profile and a length of 1955.8 mm. If the marking is gone, measure the outside length and compare it to 1955.8 mm, and confirm the pulley groove matches the BX profile.
- What information do I need to send for a quote?
- Send the part number BX 74, the profile BX and the length 1955.8 mm, along with the quantity. If you are cross-referencing from another brand, include that part number so we can confirm the equivalent.
- Is the same size listed under other brands?
- Yes. The same size is also listed under Stark BX 74, Mitsuboshi BX 74 and Optibelt BX 74.