V-belt Optibelt BX 74
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- BX
- Series
- Super TX
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
GATES and OPTIBELT: matching part numbers →OPTIBELT and STARK: matching part numbers →MITSUBOSHI and OPTIBELT: matching part numbers →DAYCO and OPTIBELT: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT BX 74 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for BX 74 and any equivalents.
This Optibelt Super TX belt is a cogged classical V-belt in the BX profile with a length of 1956 mm. Cogged classical V-belts are used on industrial drives where a standard wrapped belt may not suit the pulley size, and the raw-edge cog design is common on smaller-diameter sheaves. Confirm fit by matching the profile and the length to your drive before ordering.
To confirm this belt suits your application, read the marking on the back of the old belt. The profile should show BX and the length should correspond to 1956 mm. If the old belt is worn or the marking is unreadable, measure the outside length and check the pulley groove width against the BX profile.
The same size is also listed under Stark BX 74, Mitsuboshi BX 74 and Dayco BX 74. If you are replacing a belt on a drive with multiple belts, inspect all of them and replace as a set where the drive requires matched lengths. Check sheave wear and alignment at the same time.
Send the part number BX 74, the profile BX and the length 1956 mm by WhatsApp or email to request a quote. If you are unsure of the profile, include a photo of the back of the belt and the pulley grooves so we can help confirm the right belt.
Dimensions
- Section
- BX
- Length
- 1956mm
Frequently asked questions
- How do I confirm that this BX 74 belt fits my drive?
- Check the marking on the back of your old belt for the BX profile and a length corresponding to 1956 mm. If the marking is worn, measure the outside length and confirm the pulley groove matches the BX profile.
- Can I replace just one belt on a multi-belt drive?
- On drives that use multiple belts, it is common practice to replace the full set so the belts share the load evenly. Inspect all belts on the drive and check sheave wear and alignment before installing.
- What information should I send to request a quote?
- Send the part number BX 74, the profile BX and the length 1956 mm. If you are unsure of the profile, include a photo of the back of the belt and the pulley grooves so we can help confirm the right belt.