V-belt Dayco BX 72
- Brand
- DAYCO
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- BX
- Series
- Classical raw-edged industrial belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
DAYCO and GATES: matching part numbers →DAYCO and OPTIBELT: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DAYCO BX 72 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for BX 72 and any equivalents.
The Dayco BX 72 is a cogged classical V-belt in the BX profile with a length of 1905 mm. To match it to the belt being replaced, read the marking on the back of the old belt and compare profile and length. The same size is also listed under Optibelt BX 72.
Start with the belt you are removing. Confirm the profile is BX and the length is 1905 mm, then check the part number on the back of the belt. If the old belt is worn or the marking is unreadable, measure the outside length and compare it with the 1905 mm figure. A belt that matches in profile and length is the correct starting point.
Inspect the drive before fitting the replacement. Check sheave grooves for wear, alignment and any damage that could shorten belt life. On drives with multiple belts, replace the full set so all belts carry load evenly. Keep the old belt for comparison until the new one is running correctly.
When you request a quote, send the part number BX 72 and the profile and length from the belt marking. If you are unsure of the profile or length, send a photo of the back of the belt and the drive arrangement. The team can confirm the right belt or suggest an equivalent.
Dimensions
- Section
- BX
- Length
- 1905mm
Frequently asked questions
- How do I match the Dayco BX 72 to the belt I am replacing?
- Read the marking on the back of the old belt. The replacement should be a BX profile belt with a length of 1905 mm. If the marking is unreadable, measure the old belt and compare it with those figures.
- What should I send to request a quote for this belt?
- Send the part number BX 72, or the profile and length from the belt marking. If you are unsure, send a photo of the back of the belt and the drive arrangement so the team can confirm the right belt or suggest an equivalent.
- Can I use the same size from another brand?
- The same size is also listed under Optibelt BX 72. Confirm the profile and length match the belt you are replacing before ordering.