V-belt Dayco BX 60
- Brand
- DAYCO
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- BX
- Series
- Classical raw-edged industrial belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
DAYCO and GATES: matching part numbers →DAYCO and OPTIBELT: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DAYCO BX 60 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for BX 60 and any equivalents.
The Dayco BX 60 is a cogged classical V-belt in the BX profile with a length of 1600.2 mm. To match it to the belt you are replacing, confirm the profile and length on the old belt's back. Send the part number to our team for a quote.
Start by reading the marking on the back of the belt being replaced. Look for the profile and the length; on this Dayco belt the profile is BX and the length is 1600.2 mm. A cogged classical V-belt is identified by these two values, so they are what you compare first. If the old marking is worn or unreadable, measure the belt and note the profile.
The same size is also listed under Optibelt BX 60. When the profile and length match, the replacement belt fits the same drive position. Check the sheave grooves and the drive for wear or damage before installing the new belt. If the drive uses multiple belts, replace them as a set so the load stays even across the grooves.
Send the part number, the profile and the length to our team by WhatsApp or email. If you are unsure of the profile or length, include a photo of the marking on the old belt and the drive details. We carry the Dayco BX 60 and can help confirm it is the right belt or suggest an equivalent.
Dimensions
- Section
- BX
- Length
- 1600.2mm
Frequently asked questions
- How do I match the Dayco BX 60 to the belt I am replacing?
- Read the marking on the back of the old belt. The replacement must have the same profile, BX, and the same length, 1600.2 mm. If the marking is not readable, measure the old belt and note the profile before ordering.
- Is the same size listed under another brand?
- Yes. The same size is also listed under Optibelt BX 60. Use the profile and length to confirm the match on your drive.
- What should I send to request a quote?
- Send the part number BX 60, the profile BX and the length 1600.2 mm by WhatsApp or email. If you are unsure, include a photo of the old belt's marking and the drive details so we can help confirm the right belt.