V-belt Dayco BX 61
- Brand
- DAYCO
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- BX
- Series
- Classical raw-edged industrial belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
DAYCO and GATES: matching part numbers →DAYCO and MITSUBOSHI: matching part numbers →DAYCO and OPTIBELT: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DAYCO BX 61 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for BX 61 and any equivalents.
This Dayco BX 61 is a cogged classical V-belt in the BX profile with a length of 1625.6 mm. It is a raw-edged industrial belt built for drives where a classical cross-section is required and the pulley groove matches the BX profile. The same size is also listed under Mitsuboshi BX 61 and Optibelt BX 61.
Cogged classical V-belts are commonly used on industrial drives such as fans, pumps, compressors and other machinery where the sheave is cut for a classical profile. The cogged construction is typical of drives that run over smaller pulleys, where the belt must bend around the sheave without losing grip. Confirm that the existing belt is marked BX 61 and that the drive uses a BX profile groove before ordering.
To confirm fit, read the marking on the back of the old belt and measure the outside length. This belt is listed at 1625.6 mm. Check the pulley grooves for wear, and inspect the drive for alignment and correct tension. If the drive runs more than one belt, replace the full set at the same time so the load stays even across the grooves.
If the marking is worn or unreadable, send a photo of the belt and the drive, or the machine and drive details, by WhatsApp or email. The team can help confirm the right belt or suggest an equivalent.
Dimensions
- Section
- BX
- Length
- 1625.6mm
Frequently asked questions
- How do I confirm this is the right belt for my drive?
- Check that the old belt is marked BX 61 and that the pulley grooves are cut for the BX profile. The length on this belt is 1625.6 mm.
- Can I replace just one belt on a multi-belt drive?
- On a drive that runs more than one belt, replace the full set at the same time. Mixed wear can cause uneven loading across the grooves.
- What should I send for a quote?
- Send the part number BX 61 and the quantity you need by WhatsApp or email. If the marking is unreadable, send a photo of the belt and the drive.