V-belt Dayco BX 58
- Brand
- DAYCO
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- BX
- Series
- Classical raw-edged industrial belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
DAYCO and GATES: matching part numbers →DAYCO and STARK: matching part numbers →DAYCO and OPTIBELT: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DAYCO BX 58 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for BX 58 and any equivalents.
This Dayco BX 58 is a cogged classical V-belt in the BX profile with a length of 1549.4 mm. It is part of Dayco's line of classical raw-edged industrial belts. Cogged classical belts of this type are commonly used on drives where a standard wrapped belt runs hot or slips, such as fans, pumps, and light-duty compressors.
To confirm fit, read the marking on the back of the old belt. If it shows BX 58, this is the same profile and length. If the marking is worn, measure the outside length and compare it to 1549.4 mm, and check that the belt sits correctly in the pulley groove. A BX profile belt will not seat properly in an A or B groove, so match the profile as well as the length.
The same size is also listed under Stark BX 58 and Optibelt BX 58. When you request a quote, send the part number and the application details. If you are replacing a set, note the number of belts on the drive so the set can be matched.
Inspect the pulleys for wear, alignment, and debris before installing a new belt. A worn groove can cause a new cogged belt to slip or wear quickly. Check the tension after the first hours of running and adjust as needed.
Dimensions
- Section
- BX
- Length
- 1549.4mm
Frequently asked questions
- How do I confirm this BX 58 belt fits my drive?
- Check the marking on the old belt. If it reads BX 58, the profile and length match. You can also measure the outside length and compare it to 1549.4 mm, and verify the belt sits correctly in the pulley groove.
- Is the same size listed under other brands?
- Yes. The same size is also listed under Stark BX 58 and Optibelt BX 58.
- What should I send to request a quote?
- Send the part number BX 58 and the application details. If you are replacing a set, include the number of belts on the drive.