V-belt Dayco BP90
- Brand
- DAYCO
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
- Series
- Classical wrapped industrial belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DAYCO BP90 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for BP90 and any equivalents.
The Dayco BP90 is a classical wrapped V-belt in a B profile, 2362.2 mm long, with a 17 mm top width, 11 mm height and a 40-degree angle. This page is set up for matching it to the belt you are replacing.
Start with the belt on the drive. Read the marking on the back: the part number and profile are the first check. Then measure the outside length and compare it to the 2362.2 mm listed for the BP90. Confirm the cross-section as well: 17 mm across the top, 11 mm high, with a 40-degree angle. A B profile belt that is too wide, too narrow or the wrong length will not sit correctly in the pulley groove.
If the old belt is worn, frayed or has lost its marking, take the drive details and the old belt to your maintenance file. The BP90 can be checked against the pulley groove width and the measured length. When you request a quote, send the part number, the quantity and the profile and length from the old belt. That is enough for our team to confirm the right belt or suggest an equivalent.
Dimensions
- Section
- B
- Length
- 2362.2mm
Frequently asked questions
- How do I confirm the Dayco BP90 is the right belt for my drive?
- Check the marking on the back of the old belt for the part number and profile. Measure the outside length and compare it to 2362.2 mm. The cross-section should be 17 mm top width, 11 mm height, with a 40-degree angle.
- What should I send to request a quote for the Dayco BP90?
- Send the part number BP90, the quantity you need, and the profile and length from the belt you are replacing. If the old belt is unmarked, include the measured outside length and the pulley groove width.
- Can the Dayco BP90 be used on a drive that takes a different profile?
- No. The BP90 is a B profile belt with a 17 mm top width, 11 mm height and 40-degree angle. It should be matched to a drive that takes that cross-section and a 2362.2 mm length.