V-belt Dayco BP41
- Brand
- DAYCO
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
- Series
- Classical wrapped industrial belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DAYCO BP41 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for BP41 and any equivalents.
The Dayco BP41 is a classical wrapped V-belt in the B profile, measuring 1117.6 mm in length. This page gives you the specifications you need to match it to the belt you are replacing. The belt has a top width of 17 mm, a height of 11 mm and a 40-degree angle.
To confirm the BP41 is the correct replacement, start by reading the marking on the back of the belt currently on the drive. Compare the profile letter and the length to the B profile and 1117.6 mm listed here. Check that the top width, height and angle match the dimensions above, since a belt that is close in length but different in profile will not seat correctly in the pulley groove.
If the old belt is worn, stretched or its marking is no longer legible, measure the drive instead. Confirm the pulley groove accepts a B profile belt and measure the outside length of the old belt to compare against 1117.6 mm. When several belts run together on one drive, replace them as a set so the load stays evenly distributed.
Send us the part number BP41, or the profile and length you measured, by WhatsApp or email. Our team replies promptly and can help confirm the right belt or suggest an equivalent.
Dimensions
- Section
- B
- Length
- 1117.6mm
Frequently asked questions
- How do I confirm the Dayco BP41 fits my drive?
- Read the marking on the back of the belt you are replacing and compare its profile and length to the B profile and 1117.6 mm length of the BP41. Also check the top width of 17 mm, height of 11 mm and 40-degree angle against your pulley groove.
- What should I send to request a quote for the BP41?
- Send the part number BP41 by WhatsApp or email. If you are not certain of the number, send the profile and length from the old belt or the drive details, and the team can help confirm the right belt or suggest an equivalent.
- Should I replace more than one belt at a time?
- When multiple belts run on the same drive, replace them as a set. Mixing a new belt with worn belts can cause uneven loading and premature wear.