V-belt Dayco BP43
- Brand
- DAYCO
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
- Series
- Classical wrapped industrial belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DAYCO BP43 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for BP43 and any equivalents.
The Dayco BP43 is a classical V-belt in the B profile, with a length of 1168.4 mm. It is built for industrial drives where a wrapped classical belt is the specified replacement. To match it to the belt you are replacing, compare the profile letter and the length marked on the old belt.
Matching starts with the belt itself. Read the marking on the back of the belt being replaced: the profile should be B, and the length should correspond to 1168.4 mm. The BP43 also has a top width of 17 mm, a height of 11 mm and a 40-degree angle, so you can confirm the cross-section against the old belt if the marking is worn or unreadable.
If the marking has rubbed off, measure the old belt and note the drive it runs on. Send the part number you need, or the profile and length you measured, and the team can confirm the right belt or suggest an equivalent. We carry the Dayco BP43 for maintenance, engineering and purchasing teams across the United States, Canada, Mexico and South America.
Dimensions
- Section
- B
- Length
- 1168.4mm
Frequently asked questions
- How do I match the Dayco BP43 to the belt I am replacing?
- Check the marking on the old belt. The profile should be B and the length should correspond to 1168.4 mm. If the marking is gone, measure the old belt and compare it with the 17 mm top width, 11 mm height and 40-degree angle.
- What information should I send to request a quote?
- Send the part number BP43, or the profile and length of the belt you need. If you are unsure, include the marking from the old belt or your measurements, and the team can confirm the right belt or suggest an equivalent.
- Can I use the BP43 on a drive that currently runs a different brand?
- Yes, if the profile and length match. The BP43 is a classical V-belt in the B profile with a length of 1168.4 mm. Compare those two values with the belt being replaced before ordering.