V-belt Dayco BP197
- Brand
- DAYCO
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
- Series
- Classical wrapped industrial belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DAYCO BP197 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for BP197 and any equivalents.
The Dayco BP197 is a classical V-belt in the B profile, built for industrial drives that run on standard B-section sheaves. It measures 5080 mm in length, with a 17 mm top width, 11 mm height and a 40 degree angle. Before you fit it, check the drive and the sheaves so the new belt starts on a sound footing.
A belt change is a good moment to inspect the whole drive. Look at the sheave grooves for wear, rust, oil or debris, and confirm the grooves match the B profile of the BP197. Worn or misaligned sheaves can shorten the life of any new belt, so correct anything you find before installation.
The Dayco BP197 is a classical wrapped V-belt in the B profile, with a 17 mm top width, 11 mm height, 40 degree angle and a 5080 mm length. Check the marking on the old belt and compare it with these figures, and check sheave alignment and belt tension after fitting.
If you are replacing more than one belt on a multi-belt drive, fit the full set at the same time so the load is shared evenly. To request a quote, send the part number BP197, the quantity, and the drive or equipment details by WhatsApp or email.
Dimensions
- Section
- B
- Length
- 5080mm
Frequently asked questions
- What are the dimensions of the Dayco BP197?
- It is a B-profile classical V-belt with a 5080 mm length, 17 mm top width, 11 mm height and 40 degree angle.
- What should I check before fitting this belt?
- Inspect the sheave grooves for wear, rust, oil or debris, confirm they suit the B profile, and check alignment. Then set the correct tension after installation.
- What do you need to quote the Dayco BP197?
- Send the part number BP197, the quantity you need, and the drive or equipment details by WhatsApp or email.