V-belt Dayco BP195
- Brand
- DAYCO
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
- Series
- Classical wrapped industrial belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DAYCO BP195 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for BP195 and any equivalents.
The Dayco BP195 is a classical wrapped V-belt in the B profile. It measures 5029.2 mm in length, with a 17 mm top width, 11 mm height and a 40° angle. This page covers how to confirm it against the marking on your existing belt.
The most reliable starting point is the marking on the back of the old belt. A B-profile classical wrapped V-belt is commonly identified by a B prefix and a length designation, so a belt marked BP195 points directly to this Dayco part. Before ordering, read the full string on the belt and compare the profile letter and the length number with the data above. If the marking is worn or unreadable, measure the outside length and the top width instead.
The BP195 is a B-profile belt: 17 mm across the top, 11 mm high, with a 40° angle. Its length is 5029.2 mm. These dimensions define the belt, so any replacement must match them. A belt that is too long, too short or of the wrong profile will not sit correctly in the pulley groove and will wear quickly.
When you request a quote, send the part number BP195 along with the equipment make and model and the drive position. If you have the old belt in hand, include a photo of the back marking. Our team replies by WhatsApp or email and can confirm the belt or suggest an equivalent from the brands we carry.
Dimensions
- Section
- B
- Length
- 5029.2mm
Frequently asked questions
- How do I confirm that the Dayco BP195 is the right belt for my drive?
- Read the marking on the back of the old belt. Look for the B profile and the length designation. Compare it with the BP195 data: B profile, 5029.2 mm length, 17 mm top width, 11 mm height, 40° angle. If the marking matches, the belt is the correct one.
- What should I send to get a quote for the BP195?
- Send the part number BP195, the equipment make and model, and the drive position. A photo of the old belt's back marking helps us confirm the profile and length. We reply by WhatsApp or email.
- Can you help if the marking on my old belt is no longer readable?
- Yes. Measure the outside length and the top width of the old belt and send those measurements with the equipment details. We will compare them with the BP195 dimensions and help you identify the correct replacement.