V-belt Dayco BP152

DAYCO BP152 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for BP152 and any equivalents.

The Dayco BP152 is a classical V-belt in the B profile, with a length of 3937 mm. It is built to the standard 40-degree angle, 17 mm top width and 11 mm height for this profile. The easiest way to confirm it is the right replacement is to read the marking on the back of the old belt.

The marking on the back of a classical V-belt carries the profile and the length. On this belt that is B and 3937 mm. If the old belt is worn, dirty or the print is faint, clean the back with a rag and read it in good light, or measure the top width and height with a caliper to confirm the profile. The 40-degree angle and the 17 mm by 11 mm cross-section are the dimensions that identify a B profile.

When you have the marking, send the part number and the belt's profile and length to MR by WhatsApp or email. The team replies promptly and can confirm the right belt for the drive. If the marking is unreadable, send a photo of the old belt alongside a tape measure so the profile and length can be checked.

For drives that run more than one belt, inspect the set before ordering. Belts that have run together should be replaced together so the load stays even across the drive. Check the sheave grooves for wear and the tension after fitting, and keep the old belt's marking on file for the next replacement.