V-belt Dayco BP151
- Brand
- DAYCO
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
- Series
- Classical wrapped industrial belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DAYCO BP151 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for BP151 and any equivalents.
The Dayco BP151 is a classical V-belt in the B profile, with a length of 3911.6 mm. Before fitting a new belt, inspect the drive and sheaves so the replacement runs correctly and lasts.
Check sheave grooves for wear, rust, or embedded debris. Worn grooves let the belt sit too deep, so it slips and overheats. Confirm the sheaves are aligned and the shafts turn freely. A belt will not fix a drive that is out of line or has damaged grooves.
The BP151 measures 17 mm across the top, 11 mm high, and has a 40° angle. It is a classical wrapped V-belt, not a narrow wedge or cogged belt. If the old belt is stretched, glazed, or has a bad spot, note the part number on the back before removing it.
Send the part number, quantity, and the drive details by WhatsApp or email to request a quote. If you are unsure whether the B profile is correct, our team can help confirm the right belt or suggest an equivalent based on the information you provide.
When replacing belts on a multi-belt drive, fit a full set of the same profile and length so the load stays even. Keep the old belt for comparison until the new one is running.
Dimensions
- Section
- B
- Length
- 3911.6mm
Frequently asked questions
- What are the dimensions of the Dayco BP151?
- It is a B profile classical V-belt: 3911.6 mm long, 17 mm top width, 11 mm height, and a 40° angle.
- How do I request a quote for the BP151?
- Send the part number, quantity, and any drive details by WhatsApp or email. Our team replies promptly and can help confirm the right belt or suggest an equivalent.
- Should I check the sheaves before installing this belt?
- Yes. Inspect sheave grooves for wear or debris and confirm alignment. Worn or misaligned sheaves can cause a new belt to slip or fail early.