V-belt Dayco AX 26
- Brand
- DAYCO
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- AX
- Series
- Classical raw-edged industrial belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
DAYCO and GATES: matching part numbers →DAYCO and MITSUBOSHI: matching part numbers →DAYCO and STARK: matching part numbers →DAYCO and OPTIBELT: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DAYCO AX 26 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for AX 26 and any equivalents.
The Dayco AX 26 is a cogged classical V-belt in the AX profile, 711.2 mm long. It is used on industrial drives where a classical cross-section fits and the cogged construction suits smaller pulleys. Confirm fit by matching the profile and length on the belt you are replacing.
Cogged classical V-belts like the AX 26 are common on light industrial equipment, pumps, fans, and other drives that use classical sheaves. The AX profile is narrower than a standard A section, so check the pulley groove and the belt's own marking before ordering. The 711.2 mm length is the reference dimension to compare against the old belt.
The same size is also listed under Mitsuboshi AX 26, Stark AX 26, and Optibelt AX 26. If your drive runs more than one belt, replace the set together and check pulley alignment and tension as part of the same job.
To request a quote, send the part number AX 26, the quantity, and the drive or equipment it fits by WhatsApp or email. If you are unsure about the profile or length, include a photo of the marking on the back of the belt and we will help confirm the right belt or suggest an equivalent.
Dimensions
- Section
- AX
- Length
- 711.2mm
Frequently asked questions
- How do I confirm the Dayco AX 26 fits my drive?
- Check the marking on the back of the belt you are replacing. The profile should read AX and the length should match 711.2 mm. Also confirm the pulley groove is correct for an AX section.
- What should I send to get a quote for the AX 26?
- Send the part number AX 26, the quantity you need, and the equipment it fits by WhatsApp or email. A photo of the old belt marking helps us confirm the correct belt.
- Can I mix the Dayco AX 26 with other brands on the same drive?
- For drives with multiple belts, it is best to replace the full set with belts of the same size and construction. The same size is also listed under Mitsuboshi AX 26, Stark AX 26, and Optibelt AX 26.