V-belt Dayco AX 24

DAYCO AX 24 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for AX 24 and any equivalents.

The Dayco AX 24 is a cogged classical V-belt in the AX profile with a length of 660.4 mm. The raw-edged, cogged construction is typical of this series, and the AX profile is a common choice for compact drives that need a classical belt. This page gives you the profile and length data you need to match an existing belt or specify a replacement.

When you read the marking on an old belt, the profile and length are the two values that identify it. AX denotes a classical V-belt profile, and 660.4 mm is the datum length. If your drive uses an AX section and the measured length matches, the Dayco AX 24 is the correct size. The same size is also listed under Optibelt AX 24 and Gates AX 24, so you can compare those part numbers directly.

Cogged classical belts like this one are often used where a standard wrapped belt would run hot or slip. The raw-edged construction helps the belt grip and flex, which can be useful on smaller pulleys. Always inspect the sheaves for wear or rust and check that the belt sits correctly in the groove before installing a replacement.

If you are replacing more than one belt on a multi-belt drive, order the same profile and length for every groove. Mixing old and new belts can cause uneven tension and premature failure. Send us the part number, the profile and the length from your old belt, and we will confirm the Dayco AX 24 or suggest an equivalent.