V-belt Dayco AX 28
- Brand
- DAYCO
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- AX
- Series
- Classical raw-edged industrial belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
DAYCO and GATES: matching part numbers →DAYCO and STARK: matching part numbers →DAYCO and OPTIBELT: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DAYCO AX 28 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for AX 28 and any equivalents.
The Dayco AX 28 is a cogged classical V-belt in the AX profile with a 762 mm length. Before you fit it, inspect the drive and the sheaves so the new belt seats and runs correctly.
Check each sheave groove for wear, cracks, burrs and embedded debris, and confirm the grooves are clean and dry. A worn or polished groove lets the belt sit too deep, so it slips and wears quickly even when the belt itself is correct for the drive. Look at the sheave alignment as well, since misalignment shortens belt life on any classical V-belt drive.
Measure the old belt and read the marking on its back to confirm the profile and length match the AX 28 before ordering. The AX profile and 762 mm length identify this belt; the same size is also listed under Stark AX 28 and Optibelt AX 28. If the drive runs more than one belt, replace the full set at the same time so the load stays evenly shared.
To request a quote, send the part number AX 28, the quantity you need and the drive it goes on by WhatsApp or email. Our team replies promptly and can help confirm the right belt or suggest an equivalent where one applies.
Dimensions
- Section
- AX
- Length
- 762mm
Frequently asked questions
- What are the profile and length of the Dayco AX 28?
- It is an AX profile cogged classical V-belt with a length of 762 mm.
- What should I check on the drive before fitting this belt?
- Inspect the sheave grooves for wear, cracks, burrs and debris, verify alignment, and confirm the old belt marking matches the AX profile and 762 mm length.
- Is the same size listed under other brands?
- Yes, the same size is also listed under Stark AX 28 and Optibelt AX 28.