V-belt Dayco AP86
- Brand
- DAYCO
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- A
- Series
- Classical wrapped industrial belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DAYCO AP86 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for AP86 and any equivalents.
The Dayco AP86 is a classical V-belt in the A profile, with a 13 mm top width, 8 mm height, 40 degree angle and a length of 2235.2 mm. It belongs to Dayco's line of classical wrapped industrial belts, which we carry for maintenance and replacement work. The simplest way to order the correct belt is to match it to the one being replaced.
Start by reading the marking on the back of the old belt. Confirm the profile is A and the length is 2235.2 mm, then compare those values with the AP86. If the old belt is worn, stretched or its marking is unreadable, measure the outside length and check the cross-section before ordering.
A classical V-belt that has run for a long time may sit lower in the pulley groove and slip. Inspect the sheaves for wear, oil or debris at the same time. When a drive uses more than one belt, replace the full set so the load stays evenly divided.
Send the part number AP86, or the marking from your old belt, by WhatsApp or email to request a quote. If you are unsure of the profile or length, include the machine or drive details and the team will help confirm the right belt or suggest an equivalent.
Dimensions
- Section
- A
- Length
- 2235.2mm
Frequently asked questions
- How do I confirm the Dayco AP86 is the right belt for my drive?
- Check the marking on the belt you are replacing. The AP86 is an A profile classical V-belt with a length of 2235.2 mm, a 13 mm top width, an 8 mm height and a 40 degree angle. If those values match, it is the correct size.
- Can I replace just one belt on a multi-belt drive?
- It is best to replace the full set at the same time. Mixing a new belt with worn belts can cause uneven loading and shorten the life of the new belt.
- What should I send to get a quote for the AP86?
- Send the part number AP86 by WhatsApp or email. If you are working from an old belt, send the marking on its back, or the profile and length, and the team will confirm the match.