V-belt Dayco AP85
- Brand
- DAYCO
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- A
- Series
- Classical wrapped industrial belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DAYCO AP85 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for AP85 and any equivalents.
The Dayco AP85 is a classical V-belt in the A profile, with a length of 2209.8 mm. Its 13 mm top width, 8 mm height and 40° angle define the groove it fits and the drive it was built for. This page gives you the profile and length data you need to confirm the belt before you request a quote.
The A profile is a classical cross-section, so the AP85 is identified first by its 13 mm top width and its 40° angle. Those two dimensions determine whether the belt seats correctly in the pulley groove. The 8 mm height is the other half of that cross-section, and it is the number to check when a drive has been converted or a pulley has been replaced.
Length is the second selection point. At 2209.8 mm, the AP85 is a specific length, not a range. When you match a belt to a drive, confirm the profile and the length against the old belt or the drive documentation. A belt with the same profile but a different length will not tension correctly, and a belt with the same length but a different profile will not sit in the groove.
If you are replacing a classical V-belt, read the marking on the back of the old belt and send that part number. The team can confirm the Dayco AP85 or suggest an equivalent from what we carry. For a quote, send the part number, the quantity and any profile or length details you have from the drive.
Dimensions
- Section
- A
- Length
- 2209.8mm
Frequently asked questions
- What do the profile and length tell me about the Dayco AP85?
- The A profile gives the cross-section: 13 mm top width, 8 mm height and a 40° angle. The length is 2209.8 mm. Together they tell you whether the belt will fit the pulley groove and the drive center distance.
- How do I confirm this is the right belt for my drive?
- Check the old belt for a part number and compare the profile and length. The AP85 is an A-profile belt at 2209.8 mm. If your drive calls for an A profile and that length, it is the correct match.
- What should I send to request a quote?
- Send the part number AP85, the quantity you need, and any profile or length details from the drive. If you are replacing an existing belt, the marking on the back of the old belt is the fastest way to confirm the right item.