V-belt Dayco AP84
- Brand
- DAYCO
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- A
- Series
- Classical wrapped industrial belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DAYCO AP84 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for AP84 and any equivalents.
The Dayco AP84 is a classical wrapped V-belt in an A profile, built for standard industrial drives. It measures 2184.4 mm in length, with a 13 mm top width, 8 mm height and a 40° angle. We carry this belt for maintenance and replacement work on equipment that uses classical A-section drives.
Classical wrapped V-belts like the AP84 are common on drives where the sheave groove is sized for an A-section belt. Confirm the replacement by reading the marking on the back of the old belt and matching the profile and length. Check that the sheave groove shows no wear step or polish that would let the belt sit too deep.
Before ordering, verify the belt's cross-section against the pulley groove: the 13 mm top width and 8 mm height should sit correctly in an A-profile sheave. Also inspect the drive for misalignment, damaged sheaves and correct tension, since these affect belt life. If the marking is worn off, measure the outside length and the top width, and send those values with the part number.
To request a quote, send the part number AP84 by WhatsApp or email. If you are unsure of the exact belt, include the profile, the length as marked, and a photo of the belt and sheave. Our team replies promptly and can help confirm the right belt or suggest an equivalent.
Dimensions
- Section
- A
- Length
- 2184.4mm
Frequently asked questions
- How do I confirm the Dayco AP84 fits my drive?
- Match the belt's profile and length to the old belt's marking. The AP84 is an A-profile classical V-belt with a 2184.4 mm length, 13 mm top width, 8 mm height and 40° angle. Also check that the sheave groove is clean and unworn.
- What should I send to get a quote for the AP84?
- Send the part number AP84 by WhatsApp or email. If you are comparing against an existing belt, include the profile and length from the belt's back marking, plus a photo of the belt and the sheave if possible.
- Can you help if I am not sure the AP84 is the right belt?
- Yes. Send the details you have, such as the marked profile and length, and a photo of the old belt. Our team replies promptly and can help confirm the right belt or suggest an equivalent.