V-belt Dayco AP69
- Brand
- DAYCO
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- A
- Series
- Classical wrapped industrial belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DAYCO AP69 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for AP69 and any equivalents.
The Dayco AP69 is a classical wrapped V-belt with an A profile and a length of 1803.4 mm. It is built for standard industrial drives where a wrapped classical belt is the specified replacement. Use the marking on the old belt to confirm the profile and length before ordering.
To match this belt to the one being replaced, read the back of the old belt. A classical V-belt is identified by its profile and its length, so the A profile and the 1803.4 mm length are the two values to compare. The AP69 has a top width of 13 mm, a height of 8 mm and a 40 degree angle.
If the old belt is worn or the marking is unreadable, measure the outside length and the top width, then check the drive for the number of grooves and the pulley condition. A belt that matches in profile and length but not in construction can still run differently, so confirm the type as well.
Dimensions
- Section
- A
- Length
- 1803.4mm
Frequently asked questions
- How do I confirm the Dayco AP69 is the correct replacement?
- Compare the profile and length on the old belt: this belt is an A profile with a length of 1803.4 mm. Also check the top width of 13 mm and the height of 8 mm against the belt being replaced.
- What information should I send for a quote?
- Send the part number AP69, or the profile and length from the old belt. If the marking is gone, send the top width, height and outside length, and a photo of the drive.
- Can this belt be used on a drive that takes a different profile?
- No. The AP69 is an A profile belt with a 40 degree angle. A drive designed for another profile needs a belt that matches that profile and length.