V-belt Dayco AP28
- Brand
- DAYCO
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- A
- Series
- Classical wrapped industrial belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DAYCO AP28 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for AP28 and any equivalents.
The Dayco AP28 is a classical V-belt in the A profile, with a length of 762 mm. Its 13 mm top width, 8 mm height and 40° angle define how it seats in a standard A-section pulley groove. This page gives maintenance, engineering and purchasing teams the profile and length data needed to match or replace an existing belt.
The A profile is the first thing to check on a classical V-belt. The AP28 measures 13 mm across the top, 8 mm in height and has a 40° angle, so it is intended for pulleys cut to the same A-section dimensions. A belt with the wrong profile can sit too high or too low in the groove, which changes how it grips and wears. Confirm the pulley section before ordering.
The second check is length. The AP28 is listed at 762 mm, measured according to the classical V-belt method for this series. When replacing a belt, compare the old belt's marking and its measured length against this figure. If the drive uses more than one belt, order the full set at the same time so all belts share the same profile and length.
Dimensions
- Section
- A
- Length
- 762mm
Frequently asked questions
- What do the profile and length of the Dayco AP28 tell me?
- The A profile gives a 13 mm top width, 8 mm height and 40° angle for standard A-section pulleys. The 762 mm length is the belt's listed length in the classical wrapped series. Together they identify the belt's fit and span on the drive.
- How do I confirm the AP28 matches the belt I am replacing?
- Read the marking on the back of the old belt and compare it with the AP28 part number. Also check the profile against the pulley groove and the length against the listed 762 mm. If anything does not match, send us the old belt details and we can help confirm the right belt or suggest an equivalent.
- What should I send to request a quote for the Dayco AP28?
- Send the part number AP28, the quantity, and any details from the old belt marking. If you are unsure of the profile or length, include a photo of the belt and the pulley. We reply by WhatsApp or email.