V-belt Dayco AP30
- Brand
- DAYCO
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- A
- Series
- Classical wrapped industrial belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DAYCO AP30 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for AP30 and any equivalents.
The Dayco AP30 is a classical V-belt with an A profile and a length of 812.8 mm. Its 13 mm top width, 8 mm height and 40° angle identify it as a standard A-section belt for industrial drives. Use these dimensions to confirm it matches the belt you are replacing.
Profile and length are the first checks when selecting a classical V-belt. The AP30 uses the A profile, so the belt sits in an A-section pulley groove. The 812.8 mm length is the datum you compare against the old belt or the drive specification. Top width is 13 mm and height is 8 mm, with a 40° angle.
This belt is part of the Dayco classical wrapped industrial belt series. Wrapped construction is common in general industrial drives where the belt runs in standard sheaves. If the marking on your existing belt reads AP30, this is the same part number to reference.
To request a quote, send the part number AP30, the quantity you need, and the drive or equipment it runs on. If you are unsure whether the A profile and 812.8 mm length are correct, include a photo of the belt marking and the pulley grooves. The team can help confirm the right belt or suggest an equivalent.
Dimensions
- Section
- A
- Length
- 812.8mm
Frequently asked questions
- What do the profile and length mean on the Dayco AP30?
- The A profile means the belt is designed for A-section pulleys. The 812.8 mm length is the belt's datum length. Together with the 13 mm top width, 8 mm height and 40° angle, these dimensions let you match the belt to your drive.
- How do I confirm the AP30 is the belt I need?
- Check the marking on the back of your existing belt. If it reads AP30, this is the same part number. You can also measure the outside length and compare it to 812.8 mm, and check that the belt sits correctly in an A-section groove.
- What should I send to get a quote for the Dayco AP30?
- Send the part number AP30, the quantity required, and the equipment or drive it is used on. If you have the old belt, a photo of its marking helps confirm the profile and length.