V-belt Dayco AP140
- Brand
- DAYCO
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- A
- Series
- Classical wrapped industrial belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DAYCO AP140 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for AP140 and any equivalents.
The Dayco AP140 is a classical V-belt with an A profile and a length of 3606.8 mm. It has a top width of 13 mm, a height of 8 mm and a 40° angle. This page gives the profile and length data you need to confirm it against your drive.
The A profile is the section to match first. The 13 mm top width and 8 mm height define the groove it is built to sit in, so check the sheave groove against those two dimensions. The 40° angle is the included angle of the belt cross-section as listed.
Length is the second check. The AP140 is listed at 3606.8 mm. Measure the old belt or read the marking on its back, then compare that number with this one before you request a quote.
If you are replacing a belt that has been running, inspect the drive at the same time. Look for worn sheave grooves, oil or debris, and any misalignment that would shorten the life of a new belt. Where a drive uses more than one belt, replace the set together so the load stays evenly shared.
Dimensions
- Section
- A
- Length
- 3606.8mm
Frequently asked questions
- What are the dimensions of the Dayco AP140?
- It is an A-profile classical V-belt with a length of 3606.8 mm, a top width of 13 mm, a height of 8 mm and a 40° angle.
- How do I confirm this is the right belt for my drive?
- Check the profile and the length. The AP140 is an A profile at 3606.8 mm. Compare that with the marking on the back of your old belt or with a measurement of it.
- What should I send to request a quote?
- Send the part number AP140 and the quantity you need by WhatsApp or email. If you are unsure of the profile or length, include the marking from the old belt so we can help confirm it.