V-belt Dayco AP136
- Brand
- DAYCO
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- A
- Series
- Classical wrapped industrial belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DAYCO AP136 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for AP136 and any equivalents.
The Dayco AP136 is a classical V-belt in the A profile, with a 13 mm top width, 8 mm height and 40 degree angle. It is 3505.2 mm long, so matching it to the belt being replaced starts with those four figures.
The most reliable way to match this belt is to read the marking on the back of the old belt. If it shows AP136, you are holding the same profile and length. If the marking is worn or missing, measure the old belt: 13 mm across the top, 8 mm high, 40 degree angle and 3505.2 mm length. Any difference in profile or length means it is not the same belt.
Before ordering, inspect the drive as well. Check the sheaves for wear, alignment and any damage that could have shortened belt life, and confirm the belt sits correctly in the groove. When a drive runs more than one belt, replace the full set at the same time so the load stays evenly shared.
Send the part number AP136, or the profile and length you measured, by WhatsApp or email and the team will confirm the right belt or suggest an equivalent. If you are unsure whether the old belt matches, include a photo of the back marking and the sheave groove.
Dimensions
- Section
- A
- Length
- 3505.2mm
Frequently asked questions
- How do I confirm the Dayco AP136 is the belt I need?
- Check the marking on the back of the belt being replaced. If it reads AP136, the profile and length match. If the marking is gone, measure the old belt: A profile, 13 mm top width, 8 mm height, 40 degree angle and 3505.2 mm length.
- What should I send to request a quote for this belt?
- Send the part number AP136 by WhatsApp or email. If you are replacing an unmarked belt, send the profile, the top width, the height, the angle and the length you measured, and the team will confirm the match.
- Should I replace more than one belt at a time?
- On a drive that uses multiple belts, replace the full set together. Mixing a new belt with worn belts can leave the new one carrying more of the load. Inspect the sheaves for wear and alignment at the same time.