V-belt Dayco AP100

DAYCO AP100 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for AP100 and any equivalents.

The Dayco AP100 is a classical V-belt in the A profile, with a top width of 13 mm and a height of 8 mm. It measures 2590.8 mm in length and has a 40-degree angle. This belt is used in industrial drives where a classical V-belt is specified.

Classical V-belts like the AP100 are common on drives that run at moderate speeds and require a reliable, familiar profile. The A profile is a standard cross-section, so the first step in confirming fit is to check that the old belt is marked A and that its length matches 2590.8 mm. The 40-degree angle and the 13 mm by 8 mm cross-section are the key dimensions to compare.

To match an existing belt, read the marking on the back of the belt. If it shows the A profile and a length close to 2590.8 mm, the Dayco AP100 is the correct replacement. If the marking is worn or missing, measure the top width and the outside length, then compare those values to the profile and length listed here. When a drive uses multiple belts, replace them as a set so the load stays evenly distributed.

For a quote, send the part number AP100, the quantity, and a photo of the belt marking if it is readable. If you are unsure whether this is the right belt for your drive, include the drive model and the old belt dimensions. The team can confirm the A profile and the 2590.8 mm length, or suggest an equivalent if needed.