V-belt Dayco AP99
- Brand
- DAYCO
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- A
- Series
- Classical wrapped industrial belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DAYCO AP99 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for AP99 and any equivalents.
The Dayco AP99 is a classical wrapped V-belt in the A profile, with a 2565.4 mm length. If you are replacing a belt on an existing drive, the most reliable approach is to match the part number and the profile and length marked on the belt you are removing. We carry this belt and quote by part number.
To match the belt being replaced, start with the marking on the back of the old belt. Confirm the part number reads AP99, then check that the profile is A, the length is 2565.4 mm, the top width is 13 mm, the height is 8 mm and the angle is 40 degrees. A belt with the same part number but a different profile or length will not sit correctly in the pulley grooves.
If the marking is worn or unreadable, measure the old belt and compare it against these dimensions before ordering. The A profile is a classical V-belt cross-section, and the 40 degree angle is the included angle of the belt. Send the part number, the profile and the length you measured, and our team will confirm the AP99 or suggest an equivalent.
This belt is used on industrial drives where a classical wrapped V-belt is specified. When you request a quote by WhatsApp or email, include the part number AP99 and, if you have it, a photo of the old belt marking. That lets us confirm the profile and length quickly.
Dimensions
- Section
- A
- Length
- 2565.4mm
Frequently asked questions
- What part number do I need to quote for this belt?
- Quote Dayco AP99. It is a classical wrapped V-belt in the A profile with a 2565.4 mm length, 13 mm top width, 8 mm height and 40 degree angle.
- How do I confirm this is the right belt for my drive?
- Check the marking on the back of the belt you are replacing. The part number should be AP99, and the profile and length should match A and 2565.4 mm. If the marking is gone, measure the old belt and send those dimensions with your request.
- What information should I send with my quote request?
- Send the part number AP99, the profile and length from the old belt, and a photo of the back marking if it is readable. Our team replies promptly and can help confirm the belt or suggest an equivalent.