V-belt Dayco AP102
- Brand
- DAYCO
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- A
- Series
- Classical wrapped industrial belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DAYCO AP102 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for AP102 and any equivalents.
The Dayco AP102 is a classical V-belt in the A profile, measuring 2641.6 mm in length with a 13 mm top width, 8 mm height and a 40° angle. Before you fit it, inspect the drive and sheaves so the new belt runs true and wears evenly.
Check sheave grooves for wear, rust, burrs or embedded debris, and confirm the grooves match the A profile and 40° angle. Misaligned or worn sheaves will shorten belt life regardless of belt quality. Verify center distance and adjustment range so the belt can be tensioned correctly.
The AP102 is a classical wrapped industrial belt from Dayco, part of the company's classical wrapped industrial belt series. Its 2641.6 mm length and 13 mm by 8 mm cross-section suit drives calling for an A profile belt. Replace belts in matched sets where multiple belts run together; mixing new and worn belts can cause uneven loading.
To request a quote, send the part number AP102 by WhatsApp or email. If you are unsure the A profile and 2641.6 mm length match your drive, share the marking on the back of the old belt and a photo of the sheaves, and the team will help confirm the right belt.
Dimensions
- Section
- A
- Length
- 2641.6mm
Frequently asked questions
- What are the dimensions of the Dayco AP102?
- It is an A profile classical V-belt with a length of 2641.6 mm, a top width of 13 mm, a height of 8 mm and a 40° angle.
- What should I check before installing this belt?
- Inspect sheave grooves for wear, rust or debris, confirm they match the A profile and 40° angle, and check alignment and center distance so the belt can be tensioned correctly.
- How do I request a quote for the AP102?
- Send the part number AP102 by WhatsApp or email. If you need help confirming the profile or length, include the marking from the old belt and a photo of the sheaves.